dimensional tolerance sentence in Hindi
Sentences
Mobile
- The dimensional tolerance of the operation is about.
- Welded pipe often have tighter dimensional tolerances than the seamless type, and can be cheaper to manufacture.
- SAAMI recommended chamber dimensional tolerance range does allow for the headspacing to take place on the shoulder if need be.
- Simple shapes with loose dimensional tolerances ( + /-1 / 16 " ) can use plywood or metal forms.
- Very tight weight and dimensional tolerances can be obtained on wheel equipment, as the parison is captured on both ends.
- Common examples of inspection by measurement or dimensional tolerance specified in a drawing for that part, and is thus acceptable for use.
- The process can also be highly automated, provides strict control over dimensional tolerances and does not interfere with the biocompatibility of parts.
- In other words, if a process can manufacture parts to a narrow dimensional tolerance, the parts will not be very rough.
- Therefore, it is most economical to plan the largest sheet size possible consistent with the size and dimensional tolerances of the part.
- This process is good for large production runs at economical cost, but produces geometric shapes with less strength than other moulding processes and has poor dimensional tolerance.
- Other advantages of SSM casting include the ability to produce complex shaped parts net shape, pressure tightness, tight dimensional tolerances and the ability to cast thin walls.
- The Schneider design was very complex and expensive to build, requiring very tight dimensional tolerances which were beyond the limits of Japanese industry to sustain at the time.
- Dimensional tolerance is related to, but different from fit in mechanical engineering, which is a " designed-in " clearance or interference between two parts.
- Other factors may affect the manufacturability such as the type of raw material, the form of the raw material, dimensional tolerances, and secondary processing such as finishing.
- The precision of the work meant the plates would not collapse, even without any adhesives or other methods of connection, and give it a dimensional tolerance of up to.
- For example, due to differences in dimensional tolerances, in World War II American screws, bolts, and nuts did not fit British equipment properly and were not fully interchangeable.
- Transfer molding is different from compression molding in that the mold is enclosed [ Hayward ] rather than open to the fill plunger resulting in higher dimensional tolerances and less environmental impact.
- When dowels are used in addition to bolts, however, the tighter dimensional tolerances of dowels and their mating holes typically result in significantly less play, on the order of.
- However, arms designer Kijiro Nambu did nothing to address the dimensional tolerance issue between the bolt and gun barrel, which led to frequent failures when fired cases became stuck in the chamber.
- Because cartridges are often manufactured in the lower dimensional tolerance limits and chambers tend to be manufactured in the higher dimensional tolerance limits, these problems are often avoided with ( semi ) automatic and repeating arms.
- More Sentences: 1 2
dimensional tolerance sentences in Hindi. What are the example sentences for dimensional tolerance? dimensional tolerance English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.